-
The characteristics for glass partitions
The glass partitions have been widely used in the decoration, especially in the office, showroom, market, hotels, parlour and so on, to separate the space according the requirements. Different with the partitions by gypsum board, wooden plates or metal plate, the glass p...Read more -
Few tips to transport and use tempered laminated glass.
As the safety glass, tempered laminated glass is widely used with its good performance on the shockproof, anti-theft, bullet-proof and explosion-proof. How to use and install the tempered laminated glass well? followed are the tips, First, the tempered laminated glass should be packed by wooden c...Read more -
The way to temper thicker glass.
Normally the glass thickness is thicker than 10mm is called thick glass. Before the glass is fed into the tempering furnace, the temperature should be lowered to the minimum heating temperature, because the thick glass need longer low temperature, to avoid the glass brok...Read more -
Which factors could cause the tempered glass broken after installation
After installation, the tempered glass may face the followed factors, which affect singly or affect multiply. When the acting force from the factors is beyond the strength which the glass can bear, the toughened glass will break. Followed are the different factors, Firs...Read more -
Two ways to produce the low e tempered glass and their characteristics.
Their are two ways to produce the tempered low e glass. The first way is to coat film on the tempered glass, the second way is to coat film first, then tempered the glass with coated film. The two ways their own characteristics. For the way to coat film first, then tempered. This need the film to...Read more -
How big difference between the insulated glass with argon gas and without argon gas?
The heat preservation and heat insulation performance becomes the focus, with the improvement of people’s energy conservation awareness. To improve the heat preservation and heat insulation performance, first we need to know how the construction glass transfer heat. Normally there are two ways to...Read more -
In insulated glass, which thickness of the air space is the most suitable?
Normally the thickness of the air space for insulated glass is 6mm, 9mm, 12mm and so on, the heat transmission resistance have directly relationship with the air space thickness. Under the same condition of glass, sealing structures, the thicker of the air space, the higher of the heat transmissi...Read more -
What is single silver low e glass? Double silver low e glass? Triple silver low e glass? And what’s their advantages?
The normal off-line low e glass only have one single silver layer, it have at least 5 membranes, the function layer is the silver layer. For double silver low e glass, theoretically speaking it have at least 9 membranes, the major function layer is two silver layers, between two silver layers, th...Read more -
Why the energy saving performance for low e laminated glass isn’t good?
Only when the low e film coating contact with air, the low e glass could effectively reduce the thermal exchange between the glass surface and air, then the heat transfer coefficient (U value) could be lowered and have better energy saving performance. If the low e glass film is in the inner surf...Read more -
Located on which side in the insulated glass is more suitable for the low e glass film?
Because of the weather fastness, the low e film couldn’t be located at the external surface on the insulated glass. Normally the low e glass film is located on the inner surface of the air space, that is the #2 surface or #3 surface, #4 surface or #5 surface. But for the off-line low e glass with...Read more -
Questions about low e glass（II）
1 To face which orientation is better for the low e glass? No matter to which orientation that the low e glass faced, it won’t affect its function. In Winter, the low e glass mainly reflect the heat radiation towards indoor which indoor produced, in Summer, the low e glass mainly reflect the heat...Read more -
Questions about low e glass
1 How low radiance of the glass, then it could be called low e glass. In physics, the objects whose radiance is lower than 0.15, we called it as low emissivity objects, if so, the radiance for all the low e glass should be lower than 0.15. In reality, the radiance for all the off-line low e glas...Read more
